SCSI2SD.CA

ZuluSCSI RP2040

Learn more about the ZuluSCSI.

• Based on the proven SCSI2SD design

• Emulates up to 7 drives or CD-ROMs

• Fastest yet, up to 9.5 MB/s read, 6 MB/s write

• SCSI-1 and SCSI-2 compatible, supports sync and async transfers

• DIP switch for simple hardware setup

• Easy, SD-card based configuration & upgrades

• Self-powered via SCSI termination power on pin 25

• Mounts with our bracket in an internal 3.5" drive bay

• Looking for something cheaper?

Optional Floppy Power Header

ZuluSCSI runs off of bus termination power, supplied by your host computer.

Certain older machines do not supply bus termination power, such as certain Macintoshes.

If you know your machine does not provide terminator power, or are worried about compatibility, add this option to your order and we will solder a power connector onto your unit before shipping.

ZuluSCSI Mini RP2040

• External ZuluSCSI

• Up to 9.5 MB/s read, 2+ MB/s write

• Always-on active termination

• Jack ("male") DB-25 SCSI connector

• Power via micro-USB connector or self-powered via SCSI termination power on pin 25

• microSD card slot

• Injection-molded ABS plastic case

• Dimensions: 75 x 55 x 18 mm

ZuluSCSI Mini Slim

• External ZuluSCSI with DaynaPORT Wifi emulation

• Up to 9.5 MB/s read, 2+ MB/s write

• Always-on active termination

• Jack ("male") DB-25 SCSI connector

• Power via micro-USB connector or self-powered via SCSI termination power on pin 25

• microSD card slot

• 3D printed PETG plastic case in black or white

• Dimensions: 61 x 33 x 7 mm

ZuluSCSI Laptop RP2040 (2.5")

• 2.5" wide ZuluSCSI RP2040

• Intended for use with SCSI PowerBooks, ThinkPads, etc.

• Up to 9.5 MB/s read, 2+ MB/s write

• 5V power via microUSB connector or self-powered via SCSI termination power on pin 25

• microSD card slot

• Looking for something cheaper?

Internal SCSI Cable

Connect your new internal SCSI emulator to your computer.

• Pick from 30cm, 60cm, or 90cm (1, 2, or 3 feet) in length

• 2 50-pin connectors with flash gold conductors

• Strain relief on connectors

• Works with all internal SCSI devices using a standard, 0.1" spaced, 50-pin rectangular connector

If you would like a custom length, or more connectors, please contact us.

Turnaround time is typically 1-2 business days.

3.5" Mounting Bracket

• 3D printed bracket for:

  • ZuluSCSI RP2040

  • ZuluSCSI v1.1

  • SCSI2SD v5.2 ( not v5.5)

  • SCSI2SD v6

• Mounts in an internal 3.5" drive bay

• Includes 2x mounting screws

• Available in black plastic