Skip to main content

Store has reopened! Shipments restart Thursday, 2024-12-19. Read more...

GBSCSI

GBSCSI, the low-cost SCSI emulation alternative

GBSCSI is DECromancer's new SCSI drive emulator designed for reliability and reduced cost. Using the same support software as ZuluSCSI, GBSCSI is an authorized, CERN-OHL-S v2 licensed design. Read our interview with its creator, George Mezzomo.

GBSCSI 3.5" Hybrid

  • Based on and operates identically to the proven ZuluSCSI design

  • Emulates up to 7 drives or CD-ROMs

  • Fastest yet, up to 9.5 MB/s read, 6 MB/s write

  • Supports wireless transfer in Macs, Atari STs, and Amigas via DaynaPORT emulation

  • SCSI-1 and SCSI-2 compatible, supports sync and async transfers

  • DIP switch for simple hardware setup

  • Easy, microSD-card based configuration & upgrades

  • Self-powered via SCSI termination power on pin 25 or optional Berg power connector

  • Mounts with our bracket in an internal 3.5" drive bay

  • Looking for ZuluSCSI?

Optional Floppy Power Header

GBSCSI runs off of bus termination power, supplied by your host computer.

Certain older machines do not supply bus termination power, such as certain Macintoshes.

If you know your machine does not provide terminator power, or are worried about compatibility, add this option to your order and we will solder a power connector onto your unit before shipping.

GBSCSI 2.5" Laptop

  • 2.5" wide GBSCSI with 2mm laptop connector

  • Intended for use with SCSI PowerBooks, ThinkPads, etc.

  • Up to 9.5 MB/s read, 2+ MB/s write

  • Supports wireless transfer in Macs, Atari STs, and Amigas via DaynaPORT emulation

  • Self-powered via SCSI termination power on pin 25 only (Berg header does not fit)

  • Easy, microSD-card based configuration & upgrades

  • Looking for ZuluSCSI?

Internal SCSI Cable

Connect your new internal SCSI emulator to your computer.

  • Pick from 30cm, 60cm, or 90cm (1, 2, or 3 feet) in length

  • 2 50-pin connectors with flash gold conductors

  • Strain relief on connectors

  • Works with all internal SCSI devices with a 50-pin rectangular connector

If you would like a different length, or more connectors, please contact us. Turnaround time is typically 1-2 business days.

3.5" Mounting Bracket

  • 3D printed bracket for GBSCSI 3.5" Hybrid

  • Mounts in an internal 3.5" drive bay

  • Device mounts screwlessly in bracket

  • Convenient access to micro-USB connector and microSD

  • Sight hole for drive access LED

  • Available in black and white colours

To mount, insert the front edge into the bracket. Align rear holes with pegs. While slightly bending the bracket away from the underside of the device, press the rear GBSCSI holes onto the bracket's pegs.

Your screws can be added in the front holes for additional support.

Resources

GBSCSI